kitchenaid

Image : http://www.flickr.com

Washing machines are made by Whirlpool, Sears, Kenmore and Kitchen Aid, these newer machines called direct drive, the older machines used a belt and motor to the drive shaft. These machines use direct drive, a drive coupled to the control unit is connected to the coupling with the motor and the control unit is to break, the clutches sometimes. When this happens, the machine will take in water and drain, as this is not the pump if the coupler broke the washing machine will not spin or influenceBecause the engine is not connected to the control unit, at the end of the cycle, you will notice that the clothes are wet but not washed.

When the coupling breaks on this computer customers always think they need a new belt, they always have a strange look on her face when I tell them that this machine does not use a belt. All other brand machines even with a belt, here are some names that are belt driven for their washing machines, General Electric, Maytag, Westinghouse, Frigidaire, Speed Queen,Magic Chef and Amana.

When the washing machine washes at the beginning of the cycle, then stops with the water in them and will not flow, this problem can a defective lid switch or a defective timer. When the timer is broken chances are it will be in one of the cycles, if there are three cycles, push light, permanent or regular basis, usually it can be in the regular cycle, it does not work because the regular cycle is used more than the other two cycles. If the problemthe lid then move it will not spin on one of the cycles of turning it on.

Thanks To : shopping for kitchenaid and Cookware Sets